Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF |
Federal Supply Class
Title
STUDS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE |
| AAJD | THREAD CLASS | 3A NUT THREAD |
| AAJE | THREAD PITCH DIAMETERS | +0.3392/+0.3407 INCHES STUD THREAD |
| AASA | THREAD LENGTH | 0.562 INCHES MINIMUM NUT THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| MATT | MATERIAL | STEEL COMP 8740 |
| AASA | THREAD LENGTH | 0.812 INCHES MINIMUM STUD THREAD |
| CMLP | THREAD QUANTITY PER INCH | 16 STUD THREAD |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES SHANK |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD |